Before laying a parquet board in the room, you need to carefully think over everything, because natural wood is very demanding on external operational conditions. High humidity and inappropriate temperature can have a negative effect.
Description of the article:
It is necessary to create optimal conditions for a parquet board. Before laying it, you need to calculate the proportions and size of the room, etc.D. There are several main options for laying a parquet board: linear styling is the simplest option. In this case, the parquet goes even and parallel rows. The Swedish square is used to lay an oak board in the form of rectangles that are at a right angle.
The number of boards in such a figure is 2-4
Christmas tree is a popular way of laying, during which the boards are placed to each other at an angle. Run -in is a styling where the rows placed correctly are obtained into a run. Parquet board can be laid on a special base. If it is concrete, then you must first create a special leveling screed.
It is also sometimes required to carry out work on the waterproofing of the floor
To do this, you can use polyethylene, special membranes, etc.D. Laying on the screed is the most common option. The correctly created “pie” in this case consists of a concrete floor, a layer of waterproofing material, screed, primer, special plywood, as well as directly a parquet board.
She may, in turn, is covered with varnish. Screed is necessary when in the height of the floor there are significant high -altitude changes. After preparing the surface of the floor, it is necessary that the parquet is inside the room for several days.
Using a spatula on a plywood surface, a special glue for parquet is applied. The board can be mounted using studs, which directly depends on the styling method. After the parquet board is laid, it must be treated with putty and left for about a week so that all the moisture leaves the material. You can also lay a parquet board with lag. The process is quite simple. On the lags, you must perpendicularly lay the future floor, which is attached with self -tapping screws.