For the manufacture of the frame, the ceiling of large dimensions, it is necessary to have wooden beams and beams. For a small area, for example, a corridor or a veranda, you can do with one timber. Four wooden boards can be taken for the manufacture of the beam, in which case it will weigh much smaller and will be cheaper. The use of an artificial beam, with imitation under wood, will be more economical.
At some distance from the ceiling, beams and beams are mounted, which pass along the entire perimeter of the room. The distance is maintained depending on the diameter of the bamboo stems and on your desire to have an unusual backlight on the ceiling.
On the wall, beams are attached to the supporting bar. You can also make a couple of recesses on opposite walls with special equipment. The size of the recess should be different, which allows you to install the beam.
When installing this ceiling, a variety of lighting sources are used: first of all, lamps installed in the suspended ceiling, and, secondly, stronger lighting.
When large dimensions are decorated, the suspended ceiling is fixed only along the edges of the room, about one and a half meters. An ordinary ceiling remains in the center, otherwise the room will look very gloomy.
Bamboo stem can have any thickness. Moreover, you can use the same stems or their alternation, it all depends on the diameter. Bamboo stems are laid alone or tied in beams from different stems.
Classic ceiling lamps are very easy to choose for the style of the chosen interior. To do this, you need to change the lamp
lampshade for a new one made of a rod or willow.
If there is a desire, then you can create a metal wire frame, and then decorate it with a jute rope. The lamp is suspended on a cord decorated with a beautiful imitation of a vine.