Modern residents of country houses prefer to have autonomous water supply in dwellings. To create comfortable living conditions in the house should be a water supply. Many households in our time work only with water coming under pressure.
Therefore, on the site near the cottage or house for permanent residence, they are drilled well and install the pump. Where the depth of the occurrence suitable for using water is small, most often such work is carried out on their own.
However, in most cases, such work should be trusted by specialists. Organizations involved in the drilling of wells are available in every area. For example, drilling for water wells in Tyumen is carried out by Burvoda 72. Having trusted the work of the company’s professionals, you will be sure of good quality work.
Water drilling is a rather complicated process in which you need to take into account many important points. Since there are not few houses in the countryside, and every owner wants to have his own well, you need to choose the right distance between water wells. And it depends on the calculation of operational stocks of groundwater and the volume of water consumed from wells.
Such calculations can only be made by drilling experts.
Many owners want to make a well in a closed room adjacent to the house. To some extent, this saves funds, no need to lay pipes from a well to the house. However, it must be borne in mind that during the operation of the well, there are times when the repair is required. And getting a pump without technical means is very difficult. Therefore, all the same, it is preferable to drill a well in a place convenient for technology access.
The issue of choosing a casing, which will be lowered into the well for supplying water is very important.
More recently, only steel pipes were used for this. Now the latest technologies allow you to use plastic pipes in wells. When installing these pipes, the method of connecting the type “pipe into the pipe” is used. With this compound, a reliable and hermetic compound is ensured and is guaranteed that mechanical impurities will not fall into the pipe.
For the durable and reliable operation of the pump, you need to choose the right depth of its immersion. It is desirable that the pump is immersed in water by 1-1.5 meters. However, the water level fluctuates, especially in the arid years. In such years, control over the level of water is important, if necessary, you will have to add a pipe and cable, and it is better to immediately put them in.
Try not to lose contact with the company that drilled your well, with its help you can quickly eliminate any problems.