The facade of the building as the face of the company, cleaning buildings from pollution

The facade of the building as the face of the company, cleaning buildings from pollution

Office – the face of any company, element of image and status. Partners and clients primarily evaluate the building and interior. The first impression and location of the client will provide an impeccable appearance of the structure itself, room, staff, everything should be at the height.

Conducting some cleaning measures requires specialized equipment, special knowledge and skills. So, for example, washing windows, windows and facades are entrusted to industrial climbers.

The advantage of cleaning the facade is great. It is more profitable to carry a facade sink than to repaint the building. And if the structure is located near a large highway, then regular cleaning is simply necessary.

The most effective way to cleanse the facade of pollution is the WPF method. The process consists in the manipulation of a telescopic brush from the ground. Water enters the brush under pressure. Washing can be carried out at an altitude up to twenty -five meters. The use of special demineralized water without impurities allows you to clean the facade of any pollution without fluxes and divorces. Also the washing of the facades is carried out using chemicals. The composition is sprayed, entering the surface from a special brush, and then washed off with clean water.

Dry cleaning is called sandblasting. A mixture of an abrasive agent is used here, which is applied under air pressure to the surface. In some cases, abrasive substances are not used, dry ice is used.

Industrial climbers work on any surface and height. Cleaning is performed manually or using a high -pressure apparatus.

During manual cleaning, complex contaminants are removed with special scrapers, then a detergent is applied to the surface, the facade is cleaned with rubber slides and rubbed with napkins to shine.

Hardware cleaning provides for knocking down dirt with a stream of water or sand under high pressure. Cleaning foam is applied by the same unit, washed off, and polishing is done manually.

The method of industrial mountaineering when cleaning the facades is good in that in the process of work it is not required to use electrical lifts or auto -items, it is not necessary to build construction forests. And this means that the cost of work is significantly reduced. Mobility of climbers allows you to perform work in a short time. Washing is available even in difficult places and at any height.