Many people spend a lot of time at the computer. And besides work, people can eat, drink. So, crumbs in any case fall on the computer. You can also spill something by chance. In addition, if you do not clean the system unit, a large amount of dust begins to accumulate in it. And it, in turn, prevents the computer from working normally. Therefore, the computer should be regularly cleaned. At least once every 6 months it needs to be cleaned of garbage and dust. It is important to do everything right.
How to clean a computer from garbage and dust
Start cleaning the computer from the system unit.
First of all, it is necessary to open the cover of the system unit. You need to prepare everything in advance for cleaning. You need a damp rag, brush and vacuum cleaner.
The system unit must be turned off from the power, and also turn off all the wires from it.
Wipe the back wall of the block with a damp rag. You also need to wipe all the wires that you disconnected.
Then take the vacuum cleaner, turn it on and use it with it, clean everything inside the system unit. You need to remove all the dust that accumulated in the block.
Take the brush and gently brush off the dust from all parts inside the system unit (including board). And then repeat the operation with the vacuum cleaner. The distance between the boards and the vacuum cleaner should be no more than 1 cm.
How to clean a computer from garbage and dust
Cleaning from dust also needs to be coolers. Because there is also a sufficient amount of dust. This can also be done with the help of a brush and a vacuum cleaner.
It happens that from the fan it is not possible to remove dirt with a brush. In this case, you need to unscrew it and wipe it with an extremely neatly damp cloth. Then everything needs to be returned to the place as it was.
After you cleaned it from the inside, close the system unit back with a lid. Then connect all the necessary wires. Let it stand for 15 minutes to stand the system unit and do not turn it on.
From cleaning the system unit, proceed to cleaning the keyboard and computer mice.
Take the keyboard and turn it over. Then carefully tap it on it so that all the contents are spilled out. Then turn it back, take a vacuum cleaner and go on the keys.
How to clean a computer from garbage and dust
It is best to make out the keyboard in parts, and wash everything thoroughly. However, this is worth doing, unless you know how and you have experience in this.
Then go to cleaning the mouse. It will need to be disassembled. As a rule, it holds on several bolts. You need to clean the mouse very carefully with the help of brushes and wet rags. Then collect the mouse back.
Give the time that the keyboard and mouse are dried up and then you can use them.