Baths are a traditional structure in Russia and the CIS countries since ancient times. Recently, there has been a tendency to increase the popularity of the construction of individual houses, and along with this, the structures of real baths. Almost every owner tries to build a bathhouse on his site. In most cases, construction occurs without the involvement of specialists, almost completely with your own hands.
How to prepare for a masonry for a bathhouse
The most important element of the bath is the stove. There is nothing complicated in its construction, there is a phased instruction for the installation of a brick furnace for a home bath (it can be found either on the Internet or search in old magazines).
Special skills are not needed for the construction of the furnace, you can handle it yourself, with your own hands. It is important to stock up on materials, drawings and patience. There is an indisputable plus in the independent construction of the bath – in this way you can save a large amount of money using budget materials and without attracting the participation of special equipment and additional personnel.
A bathhouse for a bath requires a special location in a steam room. So, one part of the furnace should be responsible for heating the steam room herself, and the second to maintain the optimal level of heat in the dressing room and recreation area. As building materials, even the remains that are not useful during the construction of the main room are suitable.
To optimize the work process, it is necessary to prepare the necessary tools in advance. To the right of the future stove, it is necessary to place a bucket filled with solution, warden, level and hammer. On the left should be a bucket filled with water, an emery circle, a garbage bucket, a pencil, a scoop, a square, a sheet on which the order is applied, pliers.
How to prepare for a masonry for a bathhouse
First of all, it is necessary to check the correct location of the bath furnace. To do this, you need to make the first two rows dry – a series of masonry and a number of chimney. Next, it is necessary to lower the plumb line directly to the angles of the chimney and check whether the space is enough to arrange fire -fighting cutting.
After the preparation of all tools and materials, you can safely begin to put the furnace for the bathhouse itself. Just do not rush, because rush usually has a pernicious effect on the quality of the future building.