A warm floor device
The warm floor device consists of special heating electric cables, which are floor heating. Electric cables, as a rule, are arranged under stone and tile floors in living rooms, as well as in bathrooms and toilets. When installing the heated floor, there will be no need for other types of heating of the room, room.
If the house has a heated warm floor, then in this case the air will be distributed throughout the room, the room from the bottom up is almost perfect. As a result of this heating technology, the average temperature of the room decreases by two to three degrees, without causing discomfort in people living in it. Almost such heating means savings in expenses from ten to fifteen percent.
Electric heating of the floor is achieved by special wires, which have high resistance. The thermal sensor and the thermoregulation system are connected to the wires.Electric heating elements should be mounted on the surface of the concrete floor. After installation, they are poured with a solution, and for the tile floors are covered with the appropriate material.
Only a power electric cable with a temperature regulator goes outside the floor. As for
A warm floor device
thermostats, they are located in each room, which allows you to adjust the air temperature of a separate room depending on the need. Such a warm floor is absolutely safe.
The high effect of the floor is achieved by the thermal insulation of the field. So, it is customary to use expanded clay concrete and foam layers, as well as stone mineral wool with other heat -insulating materials as thermal -insulating materials.
Cable fastening on the floor occurs using a special mounting tape and rapidly dry glue. The heating cable should be laid zizago -like lines that will be located parallel to each other.
It is important to know that electric heating is not applicable in places in which moisture can penetrate. The use of electricity as an electric heating of the floors will require permission from an energy supply organization.